Disc Flight and Lines

What does "fade" mean in disc golf?

What does fade mean in disc golf? Fade is the leftward curve at the end of a disc's flight for a right-hand backhand, and the fourth flight number.

On this page
  1. Short answer
  2. How fade works
  3. Fade and turn together
  4. What fade means for your shots
  5. Fade ratings for beginners
  6. How to check fade on a disc
  7. Where to go next

Short answer

In disc golf, fade is a disc’s tendency to curve left, for a right-hand backhand (RHBH) throw, as it slows toward the end of its flight. It is the fourth of the four flight numbers, after speed, glide and turn. Fade ratings run from 0, where the disc finishes straightest, to 5, where it hooks hard late in the flight.

How fade works

A disc moves fastest at the start of its flight, so turn mostly shapes the early part. As the disc slows, the air flowing over it changes, and fade takes over. The disc then curves in the direction opposite its spin. For a RHBH throw, that is left.

Direction for other throws

The direction of fade depends on the throw:

  • For a RHBH throw, fade pulls the disc left.
  • For a left-hand backhand (LHBH) throw, fade pulls the disc right.
  • For a forehand, the direction reverses again. A right-hand forehand (RHFH) also fades right.

The 0 to 5 scale

  • 0: the disc finishes straight, with almost no late curve.
  • 1 to 2: a light late curve. These are often easier for beginners to control.
  • 3 to 5: a strong late curve. These are used to fight wind, to finish shots that need to go left, and for some flex and skip shots.

Fade and turn together

Turn and fade are two halves of the same flight. Turn is the early, high-speed part, and fade is the late, low-speed part. A disc with negative turn and a higher fade turns right first, then fades back left. This makes an S-curve. A disc with little turn and a high fade mostly finishes left.

What fade means for your shots

  • Flex shots use an overstable disc on an anhyzer angle. The disc turns first, then fades back.
  • Hyzer and anhyzer shots change where the disc starts, so the fade ends in a different place.
  • Finishing shots often use a high-fade disc, since the fade does the work of bringing the disc back to the target.

In wind, a higher fade can help a disc keep a firm finish. The wind can still change where the fade ends, so test your discs before you rely on them.

Fade ratings for beginners

Lower fade numbers are easier to keep on line. A disc with a fade of 0 or 1 tends to finish near where it was aimed, which suits a player learning to throw straight. Higher fades are useful later, but they punish a poor release more.

Plastic and wear also change how a disc fades, so treat a fade number as a starting point rather than a guarantee.

How to check fade on a disc

Read the four flight numbers on the disc or in the retailer’s listing. The last number is the fade. Compare discs of the same brand and similar speed, because numbers from different brands are not directly comparable. Then throw each disc flat on a calm day and watch where it finishes.

Where to go next

The complete guide to disc flight and lines

How Disc Golf Discs Fly: The Science of Flight
Read the guide

Keep exploring

Guides from other topics

All topics →